ENERGY STAR certified dryers use about 20 percent less energy than conventional models without sacrificing features or performance. This adds up to saving $180 in energy costs over the lifetime of the dryer. Models that have earned the ENERGY STAR use innovative energy saving technologies, such as moisture sensors that detect when clothes are dry and automatically shut the dryer off. They are available from brands including Electrolux, GE, Kenmore, LG, Maytag, Samsung, Whirlpool, and many more. Many ENERGY STAR certified dryers also include convenient features, such as steam cycles that can help save time on ironing clothes by preventing wrinkles.
About 80 percent of American homes have a clothes dryer, so the savings opportunity is huge. If all clothes dryers sold in the US were ENERGY STAR certified, Americans could save more than $1.5 billion each year in utility costs and prevent greenhouse gas emissions equivalent to those from more than 2 million vehicles.
Get the most efficiency from your ENERGY STAR certified dryer by considering the following:
- Sensor Drying. Use sensor drying, not timed drying. Dryers that have earned the ENERGY STAR incorporate advanced moisture sensors to help reduce their energy use by automatically shutting off when clothes are dry.
- Low heat setting. Longer drying cycles on a low heat setting use less energy. When you purchase an ENERGY STAR certified clothes dryer, look in the informational materials shipped with the product for which cycle was tested for certification and how the dryer’s other cycles or settings may use more or less energy.
- Consider gas. Eighty percent of dryers in the US are electric. If you have the option, consider using a gas dryer to save money and reduce your environmental impact.
- Savings by the pair. A full-size electric certified dryer saves $180 in energy bills over the life of the product. An ENERGY STAR certified washer/dryer pair will save even more energy and money while doing your laundry. Clothes washers that have earned the ENERGY STAR incorporate advanced technology and functionality to get significantly more water out of your clothes in its final spin cycle than a conventional model. This makes it easier for clothing to dry in an ENERGY STAR certified dryer using less heat. Less heat means energy savings and reduced wear and tear on your clothes caused by over-drying.
Current Specification Effective Date: January 1, 2015
Only gas, or electric, and compact clothes dryers meeting the ENERGY STAR definitions for electric or gas clothes dryers are eligible to earn ENERGY STAR certification.
How do I choose the right type of clothes dryer?
Electric vs. Gas
Many of the latest dryer models are available in both electric and gas versions, so you can choose which option is right for you.
- Gas dryers may cost less to operate, depending on the electric and gas rates in your area, but may have a slightly higher initial price tag. Like most electric dryers, gas models require venting to the outside of the home, in addition gas models also require a dedicated gas line which may not be practical for some types of housing and could add to the cost of installation.
- Electric dryers may be slightly less expensive to purchase initially, but may be more costly to run than gas models, depending on your area’s utility rates. For homes where outside venting may not be practical, ventless electric models are available that do not require venting. Electric dryers do not require a dedicated gas line, but most standard sized models require a 240 V outlet. Alternatively, some compact dryers are available for a 120 V outlet.
Heat Pump Dryers
For even more savings, consider ENERGY STAR certified heat pump dryers - they can save 20-60 percent more than conventional clothes dryers. Consumers with high clothes dryer usage and high electricity rates have the potential for large energy and cost savings.
Heat pump dryers take in ambient air, heat it, and then recirculate it in the dryer to maintain the temperature without using much energy. Rather than releasing moist air through a dryer vent to the exterior of the home as a conventional dryer does, a heat pump dryer passes humid air in the dryer drum through a condenser to remove the moisture without losing too much heat. The condensed moisture (water) from the drum is drained or emptied out of a holding tank in the dryer.
When considering a heat pump model, keep in mind:
- Initial Cost vs. Ongoing Savings – Clothes dryers, like all products that use energy have two price tags: 1) the initial cost of the product at the time of purchase, and 2) the cost of energy to operate that product over its lifetime. For a higher initial purchase, a heat pump model can save more energy and money with each load. Heat pump dryers take in ambient air, heat it, and then recirculate it in the dryer to maintain the temperature without using much energy.
- Venting – Since a heat pump dryer does not release air through a home’s exterior, there is no need for a dryer vent. Any existing dryer vents should be removed and/or sealed to prevent air leakage, which can add to the total initial cost for selecting a heat pump dryer. For homes without an existing vent, a heat pump dryer can offer a significant cost savings during installation, since the investment in putting in a new vent is not needed.
- Water Drainage – A heat pump dryer’s condenser removes moisture from the air during the drying process, resulting in water that needs to be drained. If installation of a drain for the water is not feasible, a water tank will need to be emptied after each dryer load. Many manufacturers sell a device that allows a heat pump dryer to use the clothes washer drain to remove the water. Depending on the configuration of the dryer and the clothes washer drain, these devices may not work in some situations.
Choose the right size for your capacity needs:
- If you are replacing a dryer, consider how much laundry you dry each week.
- Drying too large of a load will cause it to take longer to dry. The drum needs to be large enough to allow a full load from the washer to tumble freely, with enough space left over for hot air to circulate.
- Too small of a load can cause problems, too. Drying a single towel for 30 minutes will cost about as much as drying a full load for the same time. Smaller loads can actually take longer to dry without benefit of the tumbling effect of a full load.
- It is a bit easier if you are buying both a matching washer and dryer - manufacturers normally design these pairs to work together with the same sized load.
Choose a model with a high Combined Energy Factor (CEF)
Combined Energy Factor (CEF) is a measure of energy efficiency that reflects the energy use of the clothes dryer - the higher the CEF, the more energy efficient the clothes dryers. You can find and compare the CEF for all certified dryer models using the ENERGY STAR Product Finder.
Increasing Functionality and Performance
- Moisture Sensors -- Many new clothes dryers come designed with a moisture sensor, which automatically ends the drying cycle when clothes are dry.
- Automatic Cycle Termination – Select a product with automatic termination to help prevent your clothes from over-drying. Not only will this feature save energy, but it will also save wear and tear on your clothes caused by over-drying.
- Delayed Start – Delay start gives you the option of setting the dryer to begin according to your schedule. In some cases delaying the start of the dryer could save on energy costs.
- Steam – Many dryer models come with a steam cycle option or feature to help release wrinkles and remove odors in clothing.
Make doing laundry better with ENERGY STAR. Clothes washers and dryers that have earned the ENERGY STAR deliver superior efficiency and performance by incorporating advanced features that make cleaning and drying easier and more effective while saving money on your energy bills. An ENERGY STAR certified clothes washer and dryer can save a household more than $380 over the lifetime of the washer, and even more when paired with an ENERGY STAR dryer.
Clothes washers that have earned the ENERGY STAR use 25% less energy and approximately 33% less water than standard models and use a variety of sophisticated cleaning methods that deliver on performance while being gentler on your clothes.
Clothes dryers that have earned the ENERGY STAR use approximately 20% less energy than standard models and incorporate advanced features that combine less heat with sensor drying to prevent over drying – saving you energy while reducing unnecessary wear and tear on your clothes.
Together, a laundry pair that has earned the ENERGY STAR not only saves you energy and money while it effectively does the job, it also helps protect the planet, demonstrating that laundry is just better with ENERGY STAR – better for your clothes, better for you and your family, better for the environment.
- OVERVIEW: Learn why an ENERGY STAR certified clothes dryer is right for you.
- SPECIFICATION: Find out what makes a clothes dryer ENERGY STAR certified.
- BUYING GUIDANCE: Get helpful information to choose the right clothes dryer and make your home more energy efficient.
What to Consider
When Buying a