Features

• ENERGY STAR® qualified with DC Motor technology
• Perfectly quiet operation at less than 0.3 Sones
• Energy efficiency at 11.0 CFM/Watt
• In humidity sensing mode, the fan will start when humidity is above 60%, and will stop when humidity is below 60% automatically.
• Blue and amber LED indicator lights to show humidity sensor mode and full speed mode
• Annual energy cost for 24/7 operation is approximately $7.57*

Features

• ENERGY STAR®-qualified with brushless DC Motor technology
• Long-lasting, brushless DC motor engineered to operate minimum 70,000 hours
• Quiet operation at 1.0 Sone
• Includes a built-in Bluetooth 3.0 speaker, 3W and 4 Ohm
• Speaker safety rating of IPX4 for water resistance
• Convenient device-to-speaker range of 32'
• Blue LED indicator light tells at a glance whether audio is on or Bluetooth is in pairing mode
• Compact housing for easy retrofit and replacement of older bath fans
• Installs with two wall switches (not included) to turn on the speaker or the fan - or both at the same time
• Attractive grille complements any décor
• Annual energy cost for 24/7 operation is approximately $6.94*

Features

• LED light indicator alert for cleaning
• Noise level at less than 0.3 sones
• Annual energy cost for 24/7 operation is approximately $4.21
• Energy Star Certified with DC Motor technology
• Energy efficiency at 13.1 CFM/Watt

Features

• ENERGY STAR® qualified with DC Motor technology
• Noise level at less than 0.3 sones
• Annual energy cost for 24/7 operation is approximately $7.57
• Energy efficiency at 11.0 CFM/Watt
• Best price performance bath fan in the market 

Features

• Virtually silent less than 0.3 sones

• Precision engineered with DC brushless motor for extended reliability. This fan will outlast many household appliances
• ENERGY STAR qualified for efficient cost-saving operation
• Galvanized steel construction resists corrosion

• Fan impeller stops if obstructed, for safe worry-free operation

• Peace of mind quality, performance and reliability from the world's largest DC brushless fan manufacturer

Features

The HomeAire™ ADC-4 fan is intended for use in the reduction of moisture and radon entry in the home. The ADC-4 fan is factory sealed to inhibit vapor and gas leakage, operates ultra-quietly, meets all electrical code requirements, is rated for residential and commercial use, and is ETL Listed for indoor and outdoor use.

Features

• Permanently lubricated motors and high pressure centrifugal blowers easily accommodate long duct runs and promote flexibility in system design. Housing mounts directly to bracket and bracket mounts to rafters or joist for a quick and simple installation so you can move on with your day
• Suitable for intermittent or continuous ventilation applications, the in-line fan is backward inclined for strong air delivery with minimal noise and is suitable for use over a tub or shower when connected to a GFCI-protected branch circuit making it perfect for so many areas in the home
• Durable polycarbonate plastic housing has an external rotor, ball bearing motor for many years of reliable service
• Switches sold separately so you can choose the right one for your installation and lifestyle (suitable for use with solid state speed controls)

Features

• Permanently lubricated motors and high pressure centrifugal blowers easily accommodate long duct runs and promote flexibility in system design. Housing mounts directly to bracket and bracket mounts to rafters or joist for a quick and simple installation so you can move on with your day
• Suitable for intermittent or continuous ventilation applications, the in-line fan is backward inclined for strong air delivery with minimal noise and is suitable for use over a tub or shower when connected to a GFCI-protected branch circuit making it perfect for so many areas in the home
• Durable polycarbonate plastic housing has an external rotor, ball bearing motor for many years of reliable service
• Switches sold separately so you can choose the right one for your installation and lifestyle (suitable for use with solid state speed controls)

Features

• Customizable, all-in-one fan and fan/LED light combinations
• Pick-A-Flow speed selector – one fan, you choose the CFM
• Unique Plug ’N Play modules provide up to three value-added features
• Revolutionary DC motor with SmartFlow™ technology ensures optimal CFM output
• Flex-Z Fast™ bracket provides flexible, fast and easy installation
• Can be used to comply with ASHRAE 62.2, LEED, CALGreen and ENERGY STAR for Homes 3.0
• Integrated dual 4" or 6" duct adaptor (up to 110 CFM models)
• UL listed for tub/shower enclosure when used with a GFCI protected circuit
• 6 year warranty on DC motor, 5 years on LED, 3 years on parts

Features

• Customizable, all-in-one fan and fan/LED light combinations
• Pick-a-flow (50-80-110 CFM) speed selector satisfies designed air flow
• Plug ‘n play modules provide up to 3 value added features
• Revolutionary DC motor with SmartFlow technology
• Flex-Z-Fast bracket provides flexible, fast and secure installation, integrated dual 4 in. or 6 in. duct adaptor
• UL listed for tub/shower enclosure when used with a GFCI protected circuit

Features

• Customizable, all-in-one fan and fan/LED light combinations with Pick-A-Flow speed selector – one fan, you choose the CFM
• Unique Plug ’N Play modules provide up to three value-added features
• Revolutionary DC motor with SmartFlow™ technology ensures optimal CFM output
• Replaceable, GU24 base LED lamps provide warm, energy efficient illumination
• Flex-Z Fast™ bracket provides flexible, fast and easy installation
• Can be used to comply with ASHRAE 62.2, LEED, CALGreen and ENERGY STAR for Homes 3.0
• Integrated dual 4" or 6" duct adaptor (up to 110 CFM models)
• UL listed for tub/shower enclosure when used with a GFCI protected circuit
• 6 year warranty on DC motor, 5 years on LED, 3 years on parts

Features

The RadonAway® RP140 inline radon fan, when properly installed, effectively reduces radon, moisture, and VOCs from entry into homes and other buildings. The ultra-quiet RP140 meets all electrical code requirements, and is rated for commercial and residential use. This fan is sealed to inhibit leakage of radon and other gases and vapors and has a water-hardened motorized impeller and thermally protected motor. It is ETL Listed for indoor and outdoor use.

Features

The Spruce™ RB110 inline ventilation fan is versatile and suitable for most home ventilation needs, including: bathroom, living area, and garage ventilation; duct boosting; continuous ventilation and make-up air introduction.  The premium quality, remote-mounted RB110 fan is rated for commercial or residential installations and continuous operation. It operates in virtual silence and is recommended for use with multiple intake locations. It is covered by a five-year manufacturer warranty. 

Features

• Cycle switch ON/OFF for humidity-sensing and full speed modes
• Dual color LED indicator shows active mode
• Motor adjusts speed based on humidity level
• Fan turns on automatically when humidity level reaches 60%
• Fan turns off automatically when humidity level drops below 60%
• Color/Finish Family: White

Features

Utilitech model 713101C is built to make controlling bathroom humidity effortless. It can be set to operate in either of two modes- humidity sensing or full speed. HVI-certified at less than 0.3 sones, this DC brushless motor fan operates nearly silently while providing great energy efficiency.

Features

• Cycle switch on/off for humidity sensing and full-speed modes
• Dual color LED indicator shows active mode
• Motor adjusts speed based on humidity level
• Unit motor automatically adjusts fan speed based on humidity level
• Fan kicks on when humidity level reaches 60%
• Fan turns off automatically when humidity level drops below 60%
• Mounting hardware included

Features

• Cycle switch on/off for humidity sensing and full-speed modes
• Dual color LED indicator shows active mode
• Motor adjusts speed based on humidity level
• Unit motor automatically adjusts fan speed based on humidity level
• Fan kicks on when humidity level reaches 60%
• Fan turns off automatically when humidity level drops below 60%
• Mounting hardware included