Are you an HVAC designer, builder, or Rater working on a home that will be ENERGY STAR certified? If so, this page will explain one key requirement of the program – the outdoor design temperatures that must be used to calculate the room-by-room heating and cooling loads.
Outdoor Design Temperature Limits
To meet the requirements of the program, the outdoor design temperatures used must not exceed the maximum cooling season temperature and minimum heating season temperature listed in the ENERGY STAR Certified Homes Design Temperature Limit Reference Guide (PDF, 5MB) for the state and county, or territory in which the home is to be certified.
Only two exceptions apply:
- Jurisdiction-Specified Temperatures: If a jurisdiction-specified design temperature is used that exceeds the limit defined in the ENERGY STAR Certified Homes Design Limit Temperature Reference Guide, designers must submit a Design Temperature Exception Request (PDF, 120KB).
- Temperature Exception Request: In rare cases, the designer may believe that an exception to the limits in the reference guide are warranted for a particular state and county, or territory. If so, the designer must complete and submit a Design Temperature Exception Request (PDF, 120KB), including a justification for the exception, to firstname.lastname@example.org for review and approval prior to the home’s certification.
To obtain the most accurate load calculations, EPA recommends that designers always use the ACCA Manual J, 8th edition, 1% cooling season design temperature and 99% heating season design temperature for the weather station that’s geographically closest to the home to be certified.
The state and county, or territory, and corresponding outdoor design temperatures selected by the designer will be documented in the HVAC Design Report. And the Home Energy Rater will verify that the selected temperatures are within the limits in the reference guide, or per an allowance, prior to certification. Visit the ENERGY STAR Certified Homes Program Requirements page to download the HVAC Design Report and visit the ENERGY STAR Certified Homes Policy Changes and Clarifications page to learn more about recent program changes