Water-Side Economizer

Description

• For data centers with water- or air-cooled chilled water plants, a water-side economizer uses the evaporative cooling capacity of a cooling tower to produce chilled water and can be used instead of the chiller during the winter months. (A chiller is a machine that removes heat from a liquid via a vapor-compression or absorption refrigeration cycle. This liquid can then be circulated through a heat exchanger to cool air or equipment as required.)
• Water-side economizers offer cooling redundancy because they can provide chilled water in the event that a chiller goes offline. This can reduce the risk of data center down time.
• Water-side economizers are best suited in climates where the wet bulb temperature is lower than 55°F for 3,000 hours or more. This describes the majority of the United States barring areas in the extreme Southwest and portions of the Southeast. (See Figure 15 below.)
   

  

• Unlike air-side economizers, water-side economizers can be economically retrofitted.

Savings and Costs

• During water-side economizer operation, costs of a chilled water plant are reduced by up to 70%.⁴⁶
• Water-side economizer retrofits in California have shown one- to four-year paybacks.⁴⁷
• Water side economizer retrofits can sometimes be costly.

Considerations

• Water-side economizers can be integrated with the chiller or non-integrated. Integrated water-side economizers are the better option because they can pre-cool water before it reaches the chiller. Non-integrated water-side economizers run in place of the chiller when conditions allow.
• A variable speed drive should be used on the fan motor in the free cooling tower.
• Like air-side economizers, this technology depends on design and controls to work optimally.
• Data centers that use containment, along with a cold aisle or hot aisle configuration, usually have much higher server inlet temperatures. These higher temperatures can be produced using a higher chilled water set point. With intermixing eliminated, data center operators may be able to achieve their desired server inlet temperature with a 55°F or warmer chilled water supply. With these higher temperatures, water-side economizers can be used more often.
• Physical space is a major concern. Oracle attempted a retrofit and concluded that the additional parts–new "pipes, valves, and controls"–required physical space that existing facilities simply did not have.⁴⁸