Product Name
Small Network Equipment
Service Method
Submit_Small_Network_Equipment_1_x
Description
Information for certification bodies to provide to EPA on products certified as meeting the eligibility criteria for the ENERGY STAR® Program Requirements for Small Network Equipment Version 1.0. Additional instructions for submitting this information to EPA are available at www.energystar.gov/cbresources.
Release Date
TBD
Small Network Equipment Submission Container
A submission wrapper
Core Submission Data
Refer to core.xsd for more information about this element.
Small Network Equipment
Information for certification bodies to provide to EPA on products certified as meeting the eligibility criteria for the ENERGY STAR® Program Requirements for Small Network Equipment Version 1.0. Additional instructions for submitting this information to EPA are available at www.energystar.gov/cbresources.
Core Product Data
Refer to core.xsd for more information about this element.
ENERGY STAR Specification Version
Product Type
Wireless Link Used for Testing
Required for Access Points. Indicate the wireless link used for the ENERGY STAR test per Table 4 or 5.
Highest Data Rate for Test (Mb/s)
Select the highest supported Data Rate in Mb/s used during the ENERGY STAR test per Table 8 listed as "Downlink or Symmetric Link, Uplink."
Highest Data Rate for Test Other (Mb/s)
Required if Highest Data Rate for Test (Mb/s) is Other. Indicate the highest downlink data rate used during the ENERGY STAR test method per Equation 1.
Tested Input Voltage (Vac)
Required for ac powered models. Indicate the input voltage in Vac used during the ENERGY STAR test.
Tested Input Frequency (Hz)
Required for ac powered models. Indicate the input frequency in Hz used during the ENERGY STAR test.
Power Supply
Indicate the available power supplies for the model.
Network Address Translation
Indicate whether Network Address Translation (NAT) is present in the model, enabled as default when shipped, and enabled during testing.
IPv6 Networking
Indicate whether IPv6 networking is present in the model, enabled as default when shipped, and enabled during testing.
DHCP Server
Indicate whether DHCP is present in the model, enabled as default when shipped, and enabled during testing.
IPSec
Indicate whether IPSec Status is present in the model, enabled as default when shipped, and enabled during testing.
SSID
Required for Integrated Access Devices, Routers with Wireless, and Access Points. Provide the SSID for the unit under test (UUT).
Network Encryption Supported
Indicate both wired and wireless network encryption standards supported by the model.
Network Encryption As-Shipped
Indicate both wired and wireless network encryption in the model's as-shipped configuration.
Additional UUT Wired Network Settings
Indicate any changes that were made to the model's as-shipped default state for the ENERGY STAR test. If no changes were made, indicate "N/A."
Measured Idle Power (W)
Indicate the measured power in watts from the Idle State test.
Calculated Average Power (W)
Indicate the Calculated Average Power Pavg in watts per Equation 1.
Maximum Average Power (W)
Indicate the Maximum Average Power calculation in watts per Equation 2 for the model.
Measured WAN Power - Idle (W)
Required for Broadband Modems, Optical Network Termination Devices, and Integrated Access Devices. Indicate the measured power in watts from the Wired Network - WAN test with no data traffic.
Measured WAN Power - Low (W)
Required for Broadband Modems, Optical Network Termination Devices, and Integrated Access Devices. Indicate the measured power in watts from the Wired Network - WAN test at 1.0 kb/s.
Measured WAN Power - High (W)
Required for Broadband Modems, Optical Network Termination Devices, and Integrated Access Devices. Indicate the measured power in watts from the Wired Network - WAN test at the rates specified in Equation 1 or Table 8 of Section 7.1.
Measured LAN Power - Idle (W)
Required for Integrated Access Devices, Routers, and Switches. Indicate the measured power in watts from the Wired Network - LAN test with half of available wired LAN ports populated and no data traffic.
Measured LAN Power - Low (W)
Required for Integrated Access Devices, Routers, and Switches. Indicate the measured power in watts from the Wired Network - LAN test with half of available wired LAN ports populated at 1.0 kb/s.
Measured LAN Power - High (W)
Required for Integrated Access Devices, Routers, and Switches. Indicate the measured power in watts from the Wired Network - LAN test with half of available wired LAN ports populated at the rates specified in Equation 1 or Table 8 of Section 7.1.
Measured Wireless Power - Idle (W)
Required for Integrated Access Devices, Routers with Wireless, and Access Points. Indicate the measured idle power in watts from the Wireless Network - LAN test with no data traffic.
Measured Wireless Power - Low (W)
Required for Integrated Access Devices, Routers with Wireless, and Access Points. Indicate the measured low data rate power in watts from the Wireless Network - LAN test at 1.0 kb/s.
Measured Wireless Power - High (W)
Required for Integrated Access Devices, Routers with Wireless, and Access Points. Indicate the measured high data rate power in watts from the Wireless Network - LAN test at the rates specified in Equation 1 or Table 8 of Section 7.1.
WAN Connections
Required for Modems and Integrated Access Devices. Indicate the WAN connections supported by the model.
WAN Connection Other
Required if WAN Connections is Other. Indicate the type of WAN connection(s).
LAN Connections
Required for Integrated Access Devices, Routers, and Switches. Indicate the LAN connections supported by the model.
LAN Connection Other
Required if LAN Connections is Other. Indicate the type of LAN connection(s).
Number of 10/100/1000 Ethernet Ports
Indicate the number of 10/100/1000 Ethernet ports present in the model. If there are none, enter "0."
Number of 10/100 Ethernet Ports
Indicate the number of 10/100 Ethernet ports present in the model. If there are none, enter "0."
Number and Type of Other Ethernet Ports
Indicate the number and type of Ethernet ports other than 10/100 and 10/100/1000 that are present in the model. If there are none, enter "0."
Number and Type of Other LAN Ports with Link Rate <= 100Mb/s
Required for Integrated Access Devices, Routers, and Switches. Indicate the number and type of other LAN Ports with Link Rate <= 100 Mb/s. If there are none, enter "0."
Num and Type of Other LAN Ports 100Mb/s < Link Rate <= 1000 Mb/s
Required for Integrated Access Devices, Routers, and Switches. Indicate the number and type of other LAN Ports with 100Mb/s < Link Rate <= 1000Mb/s. If there are none, enter "0."
Number and Type of Other LAN Ports with Link Rate > 1000Mb/s
Required for Integrated Access Devices, Routers, and Switches. Indicate the number and type of other LAN Ports with Link Rate > 1000 Mb/s. If there are none, enter "0."
Energy Efficient Ethernet (EEE)
Indicate whether the model has EEE functionality.
Number of EEE Compliant Gigabit Ethernet Ports
Indicate the number of IEEE 802.3az compliant Gigabit Ethernet ports. If there are none, enter "0."
Maximum Ethernet Throughput
Required for Modems, Optical Network Termination Devices, Switches, Routers and Integrated Access Devices. Indicate the maximum data rate in User Datagram Protocol data payload expressed in Mb/s.
Wireless Technologies Supported
Indicate the wireless band and frequency supported by the model.
Wireless Technologies Supported Other
Required if Wireless Technologies Supported is Other. Indicate the wireless band and frequency supported by the model.
Simultaneous Instantaneous Frequency Band Support
Required for Integrated Access Devices, Switches, Routers, and Access Points. Indicate whether the product supports simultaneous instantaneous frequency bands.
Number of 5 GHz MIMO Download Spatial Streams
Required for Integrated Access Devices, Switches, Routers, and Access Points.
Number of 5 GHz MIMO Upload Spatial Streams
Required for Integrated Access Devices, Switches, Routers, and Access Points.
Number of 2.4 GHz MIMO Download Spatial Streams
Required for Integrated Access Devices, Switches, Routers, and Access Points.
Number of 2.4 GHz MIMO Upload Spatial Streams
Required for Integrated Access Devices, Switches, Routers, and Access Points.
Maximum Number of Wireless Clients
Required for Integrated Access Devices, Switches, Routers, and Access Points. Indicate the maximum number of wireless clients supported by the UUT.
Maximum Number of NAT Clients
Indicate the maximum number of NAT clients supported by the UUT.
Physical Data Ports
Indicate all Physical Data Ports.
Physical Data Ports Other
Required if Physical Data Ports is Other. Indicate the physical data ports supported by the model.
External Proxy Capability
Indicate the highest level of External Proxy capability provided by the model.
Built-in Battery
Indicate whether the model contains a built-in battery.
Data Storage Device
Indicate whether the model includes an internal data storage device.
Equipment Ratings
Provide any special equipment ratings (e.g., IEC 61850 / IEC61000 and IEEE1613, KEMA).
Telephony and VoIP
Indicate the available ports and telephony functionalities.
Low Power Wireless Technologies
Indicate whether the model supports low power wireless technologies.
RF Modulator
Indicate whether the model has an RF modulator.
Firmware Version
Indicate the firmware version if applicable. If no firmware is present, indicate "N/A."
Service Providers
Required if model is distributed to consumers through service providers. Indicate each Service Provider to through which the model is distributed separated by commas.
Model Sold at Retail
VPN
Indicate whether the model has the ability to run a virtual private network (VPN).
Firewall
Indicate whether the model is shipped with internal firewall capability.