Product Name
Clothes Dryers
Service Method
Submit_Clothes_Dryers_1_x
Description
Information for certification bodies to provide to EPA on products certified as meeting the eligibility criteria for the ENERGY STAR® Program Requirements for Clothes Dryers Version 1.0 and 1.1. Additional instructions for submitting this information to EPA are now available at www.energystar.gov/qpx.
Release Date
TBD
Clothes Dryers Submission Container
A submission wrapper
Core Submission Data
Refer to core.xsd for more information about this element.
Clothes Dryers
Information for certification bodies to provide to EPA on products certified as meeting the eligibility criteria for the ENERGY STAR® Program Requirements for Clothes Dryers Version 1.0 and 1.1. Additional instructions for submitting this information to EPA are now available at www.energystar.gov/qpx.
Core Product Data
Refer to core.xsd for more information about this element.
ENERGY STAR Specification Version
Product Type
Special Type
Indicate if the dryer is part of a laundry center. A laundry center is a consumer product that meets the definition of a residential clothes washer and an electric clothes dryer or a gas clothes dryer, which cleans and dries clothes in separate, stacked drums.
Height (inches)
Width (inches)
Depth (inches)
Universal Product Code (UPC)
This product-specific UPC code field has been replaced by the product-wide UPC code fields added to the core. This UPC code is no longer relevant and does not need to be submitted.
Matching ENERGY STAR Clothes Washer Available
Indicate if the clothes dryer is being marketed as a matched pair with an ENERGY STAR Clothes Washer.
Matching ENERGY STAR Clothes Washer ESUM
Required if Matching ENERGY STAR Clothes Washer Available is Yes or if Special Type is Laundry Center. Provide the clothes washer ENERGY STAR Model Identifier (ESUM) for the paired model or the laundry center model.
Drum Capacity (cubic feet)
Energy Test Cycle Setting(s)
Report all cycle setting(s), as well as any settings enabled by default, used to determine compliance with the current ENERGY STAR specification.
Calculated Combined Energy Factor - Max Dryness Setting (lbs/kWh)
Report the calculated value for the normal cycle with the highest dryness setting as defined in the ENERGY STAR Most Efficient criteria, based on measured test data. If multiple units were tested, report the average value. Required for ENERGY STAR Most Efficient models.
Cycle Time - Max Dryness Setting (min)
Report the time taken to complete the energy test cycle as defined in the ENERGY STAR Most Efficient criteria for the normal cycle with the highest dryness setting. Required for ENERGY STAR Most Efficient models.
Energy Test Cycle Setting(s) - Max Dryness Setting
Report all cycle setting(s), as well as any settings enabled by default, used to determine compliance with the ENERGY STAR Most Efficient criteria for the normal cycle with the highest dryness setting. Required for ENERGY STAR Most Efficient models.
Additional Dryer Features
Indicate the features that are applicable to the clothes dryer.Please indicate none if your product does not include additional washer features. For Supplementary Drying System only include as defined under the current specification.
Additional Dryer Feature - Other
Required if Additional Dryer Feature is Other. Indicate features.
Heat Pump Technology
CBs are required to indicate if the product is a Heat Pump or a Hybrid Heat Pump. The model is a Heat Pump if it includes Heat Pump technology and does not have an electric resistance heat source. The model is a Hybrid Heat Pump if it includes heat pump technology and an electric resistance heat source as determined through examination of the product and/or product documentation.
Remaining Moisture Content (RMC), Expressed as a Percentage (%)
Report the remaining moisture content of the dry load as defined in 10 CFR 430, Appendix D2, Section 3.4.3. If multiple units were tested, report the average value.
Per-cycle Standby Mode and Off Mode Energy Consump (kWh/cycle)
Report the per-cycle standby and off mode energy consumption (ETSO) as defined in 10 CFR 430, Appendix D2, Section 4.5. If multiple units were tested, report the average value.
Calculated Combined Energy Factor (lbs/kWh)
Report the calculated value based on measured test data. If multiple units were tested, report the average value.
Reported Combined Energy Factor (lbs/kWh)
Provide the rated/reported combined energy factor, which will appear on the ENERGY STAR list of certified products. Value must be the same as the values reported to the U.S. Department of Energy for compliance with Minimum Efficiency Performance Standards requirements.
Cycle Time (min)
Report the time taken to complete the energy test cycle as defined in the ENERGY STAR Version 1.0 specification, Section 5C.
Refrigerant Type
Indicate the refrigerant type used.
Refrigerant Type - Other
If Refrigerant Type is Other. Indicate the refrigerant type used.
Refrigerant Charge
Report the amount of refrigerant (ounces) in the product if applicable.
Connected Functionality
Indicate Yes if model meets all of the ENERGY STAR Connected Criteria as determined through examination of the product and/or product documentation.
Connected Demand Response Functionality Tested
Required if Connected Functionality is Yes. Indicate Yes if ENERGY STAR Test Method to Validate Demand Response was used to verify the model’s Demand Response (DR) Functionality. A model must have its DR capabilities validated using the test method and must meet all of the Connected Criteria, to use the 5% credit.
Communication Hardware Architecture
Required if Connected Functionality is Yes. Select all that apply.
Communication Standard - Application Layer
Required if Connected Functionality is Yes. Select all that apply.
Communication Standard - Application Layer Other
Required if Communication Standard - Application Layer is Other. Indicate relevant standard(s).
Communication Standard - Media/Network Layer
Required if Connected Functionality is Yes. Select all that apply.
Communication Standard - Media/Network Layer Other
Required if Communication Standard - Media/Network Layer is Other. Indicate relevant standard(s).
Direct on-premises Open-standard Based Interconnection
Required if Connected Functionality is Yes. Required if Connected Functionality is Yes. Indicate Yes if as-shipped model enables direct on-premises, open-standard based interconnection.