Television Specification

The Version 6.0 ENERGY STAR specification for Televisions is currently under development. Materials related to this revision process are provided below. Stakeholders who received past communications related to development of Version 5 will continue to receive updates on this development effort. To be added to the contact list, stakeholders are encouraged to contact televisions@energystar.gov with their contact information.

Stakeholder Comments on Final Draft Version 6.0 ENERGY STAR Televisions Specification

Final Draft Version 6.0 ENERGY STAR Specification for Televisions — July 11, 2012

EPA has released the Final Draft Version 6.0 ENERGY STAR Specification for Televisions, and the Final Draft and associated documents are available at the links below. Stakeholders are invited to review these documents and submit comments to EPA via email to televisions@energystar.gov by Wednesday, July 25, 2012.

Stakeholder Comments on the Version 6.0 ENERGY STAR Televisions ABC Proposal

Version 6.0 ENERGY STAR Televisions ABC Proposal — May 16, 2012

EPA presented stakeholders with a proposed approach for qualifying televisions with Automatic Brightness Control (ABC) enabled by default. Stakeholders are invited to review the document and submit comments via email to televisions@energystar.gov by May 31, 2012.

Draft Version 6.0 ENERGY STAR Televisions Addendum to the DOE Televisions Test Procedure — April 12, 2012

As discussed during the Draft 2 Version 6.0 Televisions Webinar, held February 15, 2012, DOE and EPA have released a proposal to test and record the power consumption of televisions with data/network capability connected in Standby-Active, Low Mode as defined by the DOE Notice of Proposed Rulemaking (NOPR) for Television Sets (TVs).

Stakeholder Comments on Draft 2 Version 6.0 ENERGY STAR Televisions Specification

Draft 2 Version 6.0 Televisions Webinar — February 15, 2012

Draft 2 Version 6.0 ENERGY STAR Televisions Specification — February 3, 2012

The Draft 2 Version 6.0 ENERGY STAR Televisions specification was released on February 3, 2012. Manufacturers and other stakeholders are strongly encouraged to e–mail feedback on this Draft 2 specification to televisions@energystar.gov by March 2, 2012.

EPA will hold a stakeholder webinar to discuss the Draft 2 specification and related documents on February 15, 2012, from 1pm–3pm Eastern Time. If you wish to attend this meeting, please RSVP to Owen Sanford, osanford@icfi.com or to televisions@energystar.gov no later than February 14, 2012, with the subject line "RSVP – ES Televisions February 15 Webinar".

Draft 2 Version 6.0 ENERGY STAR Televisions Memo

Stakeholder Comments on Draft 1 Version 6.0 ENERGY STAR Televisions Specification

Draft 1 Version 6.0 ENERGY STAR Televisions Webinar — June 8, 2011

EPA held a webinar on June 8, 2011 to discuss the Draft 1 Version 6.0 Televisions Specification and other related topics. Please find the presentation materials below.

Draft 1 Version 6.0 ENERGY STAR Televisions Specification — May 25, 2011

The Draft 1 Version 6.0 ENERGY STAR Televisions specification was released on May 25, 2011. Manufacturers and other stakeholders are strongly encouraged to e-mail feedback on this Draft 1 specification to televisions@energystar.gov by June 20, 2011.

ENERGY STAR Televisions Version 6.0 Kickoff Memo