To view Power Management settings in Windows 2000, click on Start, Run and then Control Panel. In Control Panel double click Power Options. Here you can set timeouts for your monitor, system standby, and hibernate. Notebook computer users can specify an alternative power scheme that will take effect when the PC is running on battery power.
EPA recommends setting computers to enter system standby or hibernate after 15 to 60 minutes of inactivity. To save even more, set monitors to enter sleep mode after 5 to 20 minutes of inactivity. The lower the setting, the more energy you save. The "Turn off hard disks" setting does not save much power, and can be ignored.
If you are not able to select a hibernate timeout, you may first need to enable the hibernate feature. To do so select the Hibernate tab in Power Options Properties, check "Enable hibernate support" and click "Apply" or "OK".
You may find that your PC does not go to sleep after the allotted time. PCs may not enter sleep mode when they have a file open over the network. Additionally, certain software applications may be preventing the computer from sleeping. (Software applications can tell Windows not to enter sleep modes.) Graphics-intensive screen savers can prevent PCs from entering sleep mode as well, and should be disabled.
If System Standby is not available under Power Options, make sure you have the latest video driver from your monitor manufacturer. The default Windows driver may not support System Standby.