Imaging Equipment – Version 1.0

Version 1.0 Imaging Equipment specification was finalized on August 5, 2006, and effective April 1, 2007. Partners and other interested parties with questions may contact Katharine Kaplan, EPA, at Kaplan.Katharine@epamail.epa.gov.

Version 1.0 Specification for Imaging Equipment — FINAL Pending Adoption by the European Commission — May 3, 2006

Final Draft Specification (Version 1.0) for Imaging Equipment, April 21, 2006

Draft 3 Specification (Version 1.0) for Imaging Equipment, March 17, 2006

Imaging Equipment Industry Meeting, February 14, 2006, Washington, D.C.

Draft 2 Specification (Version 1.0) for Imaging Equipment, December 21, 2005

Imaging Equipment Industry Meeting, October 14, 2005, Washington, D.C.

Final Draft Operational Mode Test Procedure, August 31, 2005

Draft 1 Specification (Version 1.0) for Imaging Equipment, August 10, 2005

Final TEC Test Procedure, July 11, 2005

Stakeholder Comments on First Draft Operational Mode Test Procedure

Imaging Equipment manufacturers and other interested parties have been encouraged to submit written comments on the First Draft Operational Mode Test Procedure. To date, EPA has been given permission to post the following comments. Please note that these do not comprise all of the comments received by EPA; only those EPA has received permission to post.

First Draft Operational Mode Test Procedure, May 17, 2005

Final Draft TEC Test Procedure, April 15, 2005

Imaging Equipment Industry Meeting, March 16, 2005, Washington, D.C.

Revised Draft TEC Test Procedure, February 16, 2005

Clarified Draft Test Procedures, September 23, 2004

Imaging Equipment Industry Meeting, July 14, 2004, Washington, D.C.

European Commission (EC) ENERGY STAR Conference, April 22 & 23, 2004, Frankfurt, Germany

EPA was pleased to attend the EC ENERGY STAR Conference in Frankfurt, Germany in April, 2004. In addition to lively discussions about the future of ENERGY STAR in Europe, EPA had the opportunity to facilitate a discussion on the Imaging Equipment Directional Draft as well as highlight comments received from industry to date. EPA was also available throughout the greater part of the week to participate in individual stakeholder meetings as requested. A comprehensive summary of the Conference may be found at EU ENERGY STAR Exit ENERGY STAR. In addition, relevant materials are presented below for your review.

Stakeholder Comments on Imaging Equipment Directional Draft

Imaging Equipment manufacturers and other interested parties have been encouraged to submit written comments on the Directional Draft. To date, EPA has been given permission to post the following comments. Please note that these do not comprise all of the comments received by EPA; only those EPA has received permission to post.

Imaging Equipment Directional Draft, February 10, 2004

Other Correspondence

Partner-reported Data

Imaging Equipment Industry Meeting, April 16, 2003, Washington, D.C.

Other Resources