Products that save energy & help prevent climate change

Clothes Washers

for Consumers
(Are you a partner? See For Partners)

Clothes Washers The average American family washes about 300 loads of laundry each year. ENERGY STAR can help families cut their related energy and water costs. ENERGY STAR certified clothes washers use about 35% less energy and 35% less water than regular washers. They also have a greater tub capacity which means you can wash fewer loads to clean the same amount of laundry. They are available in front-load and top-load models. The top-load models look like standard machines on the outside, yet they do not waste water filling up the tub. They clean using sophisticated wash systems to flip or spin clothes through a stream of water. Many have sensors to monitor incoming water levels and temperature. They also rinse clothes with repeated high-pressure spraying instead of soaking them in a full tub of water.ENERGY STAR Most Efficient in 2014

Consider the following:

  • Use less energy. On average, a new ENERGY STAR certified clothes washer uses will save about $60 on utility bills, each year. Over the life of your washer, you'll save enough money to pay for the matching dryer.
  • Use less water. A full-sized ENERGY STAR certified clothes washer uses 21 gallons of water per load, compared to the 33 gallons used by a standard machine. Over the machine's lifetime, that's a savings of 3,600 gallons of water each year!!
  • Is your washer over 10 years old? It's estimated that there are 76 million top-loading washers with agitators, 25 million of which are at least 10 years old, still in use across the country. Washers manufactured before 2003 are significantly less efficient than newer models. Together, these inefficient washers cost consumers $2.9 billion each year in energy and water.

If every clothes washer purchased in the U.S. this year earned the ENERGY STAR, the energy cost savings would grow to more than $4 billion each year, preventing 31 billion pounds of annual greenhouse gas emssions - the equivalent of the emissions from 3 million vehicles.

Current Specification Effective Date: February 1, 2013

Clothes washers originally qualified for the ENERGY STAR label in May, 1997. Clothes washers that have earned the ENERGY STAR are about 35% more efficient than non-qualified models and are more efficient than models that simply meet the federal minimum standard for energy efficiency.

Eligibility Requirements:
Only front and top loading clothes washers meeting the ENERGY STAR definitions for residential clothes washer and commercial clothes washer, with capacities greater than 1.6ft3 and less than 6.0 ft3 are eligible to earn ENERGY STAR certification.

Clothes Washers Key Product Criteria: ENERGY STAR

Learn How a Product Earns the Label

 

What else should I look for when buying a Clothes Washer?

Check the yellow EnergyGuide label.
This label helps you determine how much energy it takes to operate the model, compare the energy use of similar models, and estimate annual operating costs. Learn How to Use the EnergyGuide Label.

Think carefully about the size.
While a larger model will obviously hold more clothes, it will also use more energy. On the other hand, a model that's too small will require a lot more clothes washing. ENERGY STAR qualified models are also available in stackable and under-the-counter designs, which fit in smaller spaces.

Choose an ENERGY STAR certified clothes dryer.
ENERGY STAR certified dryers use 20 percent less energy than conventional models without sacrificing features or perfomance. They feature innovative energy saving technologies, such as moisture sensors that automatically shuts off the machine when clothes are dry, which saves energy and reduces wear and tear on your clothes caused by over-drying.

Choose a model with a high Modified Energy Factor (MEF) and a low Water Factor (WF).
Modified Energy Factor (MEF) is a measure of energy efficiency that considers the energy used by the washer, the energy used to heat the water, and the energy used to run the dryer. The higher the MEF, the more energy efficient the clothes washer. Water Factor (WF) measures water efficiency in gallons of water consumed per cubic foot of capacity. The lower the WF, the more water efficient the clothes washer. Both MEF and WF are listed on the ENERGY STAR qualified product list:

Related Information:

Educate yourself on new clothes washer technology

Advanced Technology

Most ENERGY STAR certified clothes washers do not have a central agitator.

Clothes washers that meet ENERGY STAR criteria use next generation technology to cut energy and water consumption about a third compared to conventional washers.

ENERGY STAR certified clothes washers come in either front-load or redesigned top-load designs. Both configurations include technical innovations that help save substantial amounts of energy and water.

No Central Agitator

Front-loaders tumble clothes through a small amount of water instead of rubbing clothes against an agitator in a full tub. Advanced top loaders use sophisticated wash systems to flip or spin clothes through a reduced stream of water. Both designs dramatically reduce the amount of hot water used in the wash cycle, and the energy used to heat it.

High Spin Speeds

Efficient motors spin clothes two to three times faster during the spin cycle to extract more water. Less moisture in the clothes means less time and energy in the dryer.

Save in So Many Ways!

Save enough money to pay for the dryer.

You're wasting 12 gallons of water every time you wash with a non-ENERGY STAR certified clothes washer.

Washers with agitators pull and rub clothes to get them clean. Clothing damage can be seen in the amount of lint in your dryer.

In recent years, clothes washer technology has seen dramatic improvements in efficiency and functionality. Selecting an ENERGY STAR certified washer ensures you get premium features and equal functionality, in addition to the following benefits:

Top Loading & Front Loading Clothes Washers

Top-loading models look like conventional machines from the outside, but these ENERGY STAR certified washers use different types of washing action to get clothes clean with less water and energy. Many have sensors to monitor incoming water temperature closely. They also rinse clothes with repeated high-pressure spraying instead of soaking them in a full tub of water.

Front-loading models are similar to machines used in laundromats. They use a horizontal or tumble-axis basket to lift and drop clothing into the water instead of rubbing clothes around a central agitator. Both top-loading and front-loading ENERGY STAR certified clothes washers save water and energy. They also use faster spin speeds to extract more water from clothes, reducing dryer time and energy use.

For both models, check to see if you need to use special detergent. Low-water washers use special low-suds detergent for best results. Ask your sales representative for recommendations on detergent use.

Clothes Washing Best Practices

Best Practices

Clothes Washer Tips

Clothes Dryer Tips

ENERGY STAR now certifies clothes dryers. Learn More!

Increasing Functionality and Performance of your ENERGY STAR Clothes Dryer:

  • Moisture Sensors -- Many new clothes dryers come designed with a moisture sensor, which automatically ends the drying cycle when clothes are dry.
  • Automatic Cycle Termination – Select a product with automatic termination to help prevent your clothes from over-drying. Not only will this feature save energy, but it will also save wear and tear on your clothes caused by over-drying.
  • Delayed Start – Delay start gives you the option of setting the dryer to begin according to your schedule.  In some cases delaying the start of the dryer could save on energy costs.
  • Steam – Many dryer models come with a steam cycle option or feature to help release wrinkles and remove odors in clothing.

 

Did You Know?

Clothes washers that have earned the ENERGY STAR use about 35 percent less water and about 35 percent less energy than a regular washer.